Wheelchair Carriers & Covers, ETC.

Now you can bring your wheelchair or scooter with you on your ride!

Customer Membership: 2% off to anyone who belongs to an organization or association for people with disabilities.  Contact us with the name of the organization, your member id and we will apply the discount and refund the difference.

Motorcycle Wheelchair Carriers
Motorcycle Wheelchair Carriers

Manual Wheelchair Carriers

Quickly load and carry a manual wheelchair on the back of your motorcycle. Rather than deal with the pain and stress of lifting a wheelchair into your motorcycle, the platform tilts to allow you to roll the wheelchair on and off the carrier with ease!

    Heavy-duty powder-coated steel construction
  100 lb weight capacity
  Tilting platform for easy roll-on loading of manual wheelchairs
  Folds down and out of the way for access to your tailgate or trunk
  Adjustable stability arm secures wheelchair ­– no need for tie-down straps!
  Carrier folds up and out of the way for access to your vehicle’s trunk or tailgate

This Carrier is easily mounted onto the back of any motorcycle with a hitch ball mount. Once loaded, the adjustable stability arm keeps the wheelchair in place during transportation, eliminating the need for tie-down straps. Easy and convenient.

Please Note: Requires hitch ball mount for use.

Comes with a 1 year warranty

$195.99 This is available at Home Depot 

 

 

 

Trike Motorcycle Wheelchair Covers

Wheelchair Carrier Weather Covers

Protect your wheelchair during travel or storage with this heavy-duty cover. Designed for a folding manual wheelchair, the cover keeps your chair dry, clean, and ready to use. It easily slips over most wheelchair lifts, and features a footrest elastic band, rear drawstring cinch, Velcro side access, and four tie down grommets.Features and Benefits  Weatherproof nylon offers incredible protection  Velcro seam with snap buckle enables use with carrier lift arms  Front elastic band wraps tightly around footrests and rear drawstring cinch secures the cover bottom to wheels  Measures 38" L x 9" W x 44" H  Four underside tie down grommets work with bungee-style cords  Carrying pouch included

Keep your Chair Safe from Accidental Damage

Keep your folding manual wheelchair safe from damage during travel or storage due to inclement weather and dust with this durable wheelchair cover. With convenient Velcro/buckle side access, this wheelchair cover easily slips over the arm on a wheelchair lift. This cover features a front sewn elastic band which wraps tightly around the wheelchair footrests, and a rear cinch drawstring to secure the cover bottom around the wheels.

Made in the USA, this cover has four built in grommet tie-down points, and includes a convenient carrying pouch.

$189.49    Contact Us To Purchase

Trike Motorcycle Scooter Carriers

Steel Folding Scooter & Wheelchair Carrier

This deluxe scooter and wheelchair carrier has all the features you'll need for quick and safe transportation of your wheelchair or scooter at an extremely affordable price. Made from black powder coated steel, this carrier holds up to 500 lbs yet it's light and easy to handle. Includes an extra long 59" three position ramp that folds into two pieces for easy storage on the carrier and makes loading and unloading a breeze. Optional Swing-away accessory allows for easy access to the rear of your vehicle.  Accommodates most wheelchairs and scooter and carries up to 500 lbs 

Made from durable black powder coated steel  46-1/2" x 28" usable platform  59-1/8" long x 27 1/2" loading ramp included  Easy installation and assembly  Weighs only 86 lbs  Fits Class III and IV 2" hitches  10 tie down points for maximum security  Includes 5/8" hitch pin, ramp, anti-wobble device  Swing away option available

The SC500-V3 deluxe wheelchair and scooter carrier has all the premium features offered at a super low introductory affordable price! The main features of this mobility carrier are the folding design and extra long 59-1/8" loading ramp allowing this carrier to be used on just about any vehicle with a 2" trailer hitch. With the pull of a hitch pin your carrier can be folded up vertically to the back of your vehicle to save space when parking in car ports, garages, or parking lots! The wheelchair and scooter carrier is manufactured from steel, has a thick black powder coat to protect from the elements, and has a massive 500 lb weight capacity! The surface of the carrier is a heavy duty steel mesh with 1" square support tubes underneath which won't bend or flex from the weight of your scooter or wheelchair.

The mobility carrier has everything you need for loading and hauling your expensive mobility device.The wheelchair and scooter carrier features an integrated two section ramp which folds up and out into three different positions. The first position keeps the ramp folded flat to the carrier surface and held down with a spring pull pin. The folded flat position is to keep the ramp self stored and secured when the carrier is folded up. The second ramp position allows the ramp to stand up straight when a mobility device is on the carrier and is held in place with two spring pins. The last position is the ramp unfolded. This position allows for scooters or power wheelchairs to be pushed or driven up the ramp.Please Note: Mobility devices are NOT to be occupied when loading, unloading, or on the carrier!The ramp is 27-1/2" wide by 59-1/8" long providing a gradual slope for easy loading of your mobility device. A welded handle featured on the ramp allows for easy folding and unfolding. Tie down straps are available in cam or ratchet styles with rubber coated hooks which can be hooked onto any of the 10 tie down holes featured on the 4-1/4" tall tray sides. The tray sides feature five carrying handles for easy handling when installing the device. The rear of the carrier has two reflectors for greater visibility at night. The carrier's usable dimensions are 46-1/2" long by 28" wide, accommodating almost all of today's mobility devices.In addition to the cam and ratchet straps, retractable straps are also available. These are the easiest straps to use with the SC500-V3 carrier. By removing the extension on the retractable strap they can be mounted directly to the 4 mounting points on the carrier allowing you to quickly strap down your power wheelchair or scooter. These straps can remain on your carrier at all times so they are always handy.

Supporting the carrier is the heavy duty 2" hitch tube which features 2 bolts and a safety pin underneath to allow the hitch tube to be removed from the carrier. Two bolts fitted underneath the folding hitch tube allow you to level the carrier so that the pin holes line up to secure the carrier in the unfolded position. The distance between the hitch pin hole and the carrier is 13-1/2" unfolded and when the carrier is folded the distance is 4-5/8".

Please Note: This carrier is NOT recommended for 1-1/4" hitches.

Also available is a heavy duty anti-tilt locking device which prevents carrier wobble during transportation. The hitch tube has a 5/8" hitch pin hole for the included hitch pin and 1/2" hole for the pinch bolt (if anti tilt can not be used) for securing the carrier to your vehicle and will work on Class III or IV hitches.

$699.00   Item #: SC500-V3  Contact Us To Purchase

Scooter Carrier Weather Cover

Scooter Carrier Weather Cover

Designed for use with scooters, this durable mobility scooter cover has corner Velcro slits to secure over the tie-down straps, while two integrated webbing belts fasten underneath to hold the entire mobility cover in place for a tight fit. Exposure to weather can wear down your mobility aid before its time; a high-quality scooter cover will fend off the effects of rain, debris and sun while transporting your scooter behind your vehicle. This cover is made of lightweight, water-resistant nylon fabric with a rubber backing.Features and Benefits  Designed for transporting scooters 

Durable but lightweight nylon fabric protects from rain, sun and debris  4 Corner slits with Velcro and buckles allow for tighter fit when using tie down straps  Measures 53"L x 26"W x 32 1/2"H  Two tie down straps buckle across bottom of carrier to hold mobility cover in position  Reflective tape for increased visibility  Made in the USAPlease note:  We recommend using securing straps over the top and through the tie-down loops with this cover when traveling on the highway. This will reduce the amount of excess room under the cover and prevent billowing at high speeds.  Extend the Life of your Scooter

All four corners open with a 10 1/2" Velcro slit so the cover may be secured over the carrier tie downs for a tighter fit; plastic buckles at the corners keep them closed. The cover has four nylon loops on each side, giving you the option to strap down the cover at additional tie-down points. Two 1" wide, built-in tie-down straps with plastic buckles secure the cover across the bottom of the carrier, keeping it in place. A reflective strip on the back makes the scooter cover more visible in low-light situations. The mobility scooter cover measures 53"L x 26"W x 32 1/2"H and is proudly manufactured in the USA.$220.00 Item #: CVR-SC-4S

Contact Us To Purchase

Wheelchair Brakes With Stair Climbing Features

Classic Brakes:

  • Active wheelchair brake

  • Automatically brakes the wheelchair and prevents it from unwanted moving

  • For regular daily use in dry conditions

  • Not recommended to use on wet surfaces

  • Replaces the standard brake

  • Aluminum brake lining

The main elements of the brake are made of Aluminum and Inox. The brake lining is made of Aluminum, thus guaranteeing the long life of the brake wheel. The brake is mounted on a wheelchair using a standard 19 mm clamp. The brake function is completely mechanical and easy.

The package includes 2 brakes and 4 clamps: 2 x 22,5 mm & 2 x 25,4 mm. There is an option to purchase a 30 mm clamp separately, email us below and include this request.

European origin
$545.99 Includes Shipping   Contact us to purchase

Wheelchair Brake With Stair Climbing AbilitiesOffers independence of the people who use wheelchairs when moving around, climbing a slope or stairs & even anti-rollback.More Freedom:It frees the wheelchair user from dependence on the help of others.Brake With More Than Just One Function:Multi-functional automatic accessory for the disabled, which helps to climb a slope in all weather conditions and is at the same time a two-way brake and cushions shocks in city traffic.Safe & Quality:It safely increases the quality of life and health.Anti-Roll Back & Stair Climbing:The anti-roll back allows active disabled people to climb stairs independently, while people with dementia, overweight people or people with multiple sclerosis make it easier to move around in a wheelchair everyday.

GENERAL ABOUT PRODUCTS
There are two brakes in the brake kit, left and right. Four standard mounting clamps are included. For attachment to a wheelchair with a round wheelchair frame with a diameter of 22.5 mm or 25.4 mm. All these customers (there are also the most customers) will be able to install our brakes without any problems. If the wheelchair frame is different, we suggest that these customers contact us directly and send us a picture and Type of wheelchair. For each such customer, we will check the possibility of installing our brake on his wheelchair or find a solution for installation. All other customers can also easily contact us to check the possibility of mounting on their wheelchair.
For very active wheelchair users, we recommend the Top model, where the brake pad can be replaced and this brake works very well even in wet weather. For slightly less active users and for use mostly in dry weather, the Classic model can also be used. The PU model is designed exclusively for "completely hard" PU tires.


Active wheelchair brake DEZZIV:

  •     replaces the standard wheelchair brake

  •     is easy to use and install

  •     is universal for any wheelchair type

  •    can be mounted on a wheelchair with clamps (included in package!)

  •     automatically brakes the wheelchair and prevents it from unwanted moving

  •     2 years warranty

Wheelchair Brakes With Stair Climbing Features

Top Brakes:

An active wheelchair brake that automatically brakes the wheelchair and prevents it from unwanted moving

  •     Active wheelchair brake for demanding user

  •     Automatically brakes the wheelchair and prevents it from unwanted moving

  •    For advanced use, also in wet conditions

  •     Replaces the standard brake

  •     Brake pad made of neoprene reinforced with fiberglass


DEZZIV Wheelchair Brake TOP is an active wheelchair brake designed for more demanding users and conditions (wet, rain or snow). It's made of stainless materials - Aluminum and Inox, and is completely weather resistant. The brake pad is made of Neoprene material, which is reinforced with glass fiber. The brake lining for TOP can be replaced and is sold in our shop. All moving elements of the brakes are mounted with polyethylene sleeves, and thus it is ensured long brake life and easy operation.

The DEZZIV brake set contains two complete brakes, right + left, 2 pieces of 22.5 mm clamp, 2 pieces of 25.4 mm clamp and installation & maintenance instructions. There is an option to purchase a 30 mm clamp in our shop, email us below and include this request.

European origin
$616.99 Includes Shipping   Contact us to purchase

Wheelchair Brakes With Stair Climbing Features

PU Brakes:

An active wheelchair brake that automatically brakes the wheelchair and prevents it from unwanted moving

  •     Active wheelchair brake for Polyurethane (PU) tires

  •     Automatically brakes the wheelchair and prevents it from unwanted moving

  •     For regular daily use in dry conditions

  •     Not recommended to use on wet surfaces

  •     Replaces the standard brake

  •     Aluminum brake lining


DEZZIV Wheelchair Brake PU is an active wheelchair brake designed for PU tires, intended for daily normal use and normal dry conditions. It is intended exclusively for use together with PU (Polyurethane) wheelchairs tires.

The main elements of the brake are made of Aluminum and Inox. The brake lining is made of Aluminum, thus guaranteeing the long life of the brake wheel. The brake is mounted on a wheelchair using a standard 19 mm clamp.

The package includes 2 brakes and 4 clamps: 2 x 22,5 mm & 2 x 25,4 mm. It's also possible to purchase the 30 mm clamp, email us below and include this request.

European origin
$545.99 Includes Shipping   Contact us to purchase